I CT FOR

ADDICTIVE PLEASURES
ADDICTIVE PLEASURES

Leave Sum Luv

My Fav Fans

I Am Protected

myfreecopyright.com registered & protected

TWI Registered

UTR Registered

Network Blog

Follow Me on Twitter

3/20/2011

postheadericon ♥PTE Tut Contest Tag: Dream♥

HELLO AGAIN LOVELIES!  I AM POSTING MY TUT FOR THE PTE TUT CONTEST. SO WITH THIS CONTEST YOU HAVE TO USE A PTE TUBE & EITHER A PTE BOUGHT SCRAP KIT OR A FTU SCRAP KIT.  SO LET'S GET GOING!

DREAM


SUPPLIES:

PSP: ANY VERSION, I USED PSP X2

TUBE OF CHOICE: I USED THE ARTWORK OF ARTHUR CROW, YOU MUST HAVE A LICENSE TO USE HIS WORK
TO PURCHASE TUBE & GET INFO ON OBTAINING A LICENSE, PLEASE GO TO PTE (PSP TUBES EMPORIUM) HERE

SCRAP KIT OF CHOICE:  I USED AN FTU KIT CALLED BETSY'S PARADISE DREAM BY DESIGNS BY VAYBS,
WHICH YOU CAN GET HERE

MASK OF CHOICE: I USED A MASK ALSO FROM DESIGNS BY VAYBS, MASK #09, IT IS A MASK SET 09-15, WHICH YOU CAN GET HERE, YOU NEED TO GO DOWN ABOUT 3/4 OF THE PAGE.

EFFECTS: XERO RADIANCE

FONT OF CHOICE: I USED CALLIE HAND FOR THE NAMES & ARIAL FOR THE COPYRIGHT


ALRIGHT, LET'S GET STARTED:

OPEN A NEW IMAGE 700 x 700

OPEN FRAME 6 & RESIZE BY 80%  COPY & PASTE ONTO IMAGE

OPEN PAPER 6, GO TO RESIZE AS BEFORE, BUT CHANGE THE PIXEL DIMENSIONS FROM PERCENT TO PIXELS & RESIZE TO 700 x 700 PIXELS. COPY & PASTE UNDER FRAME.  

MAKE YOUR FRAME ACTIVE IN THE LAYER PALETTE, GO TO YOUR MAGIC WAND & CLICK INSIDE THE FRAME. GO TO SELECTIONS--MODIFY--EXPAND.  EXPAND BY 6. GO BACK TO YOUR LAYER PALETTE & MAKE THE PAPER ACTIVE.  GO TO SELECTIONS--INVERT & HIT DELETE ON YOUR KEYBOARD.  GO TO SELECTIONS--SELECT NONE

OPEN DECOR 11 & GO TO RESIZE & CHANGE YOUR PIXEL DIMENSIONS BACK TO PERCENT. RESIZE 80%.  GO TO IMAGE--MIRROR.  COPY & PASTE ON TOP OF FRAME ON THE BOTTOM OF THE FRAME.  GO TO LAYER PALETTE & RIGHT CLICK ON THIS ELEMENT & DUPLICATE.  GO TO IMAGE--FLIP, THEN IMAGE--MIRROR.  

GO TO LAYER PALETTE & DUPLICATE THIS AGAIN, THEN GO TO IMAGE--FREE ROTATE--ROTATE LEFT 90 DEGREES.  GO TO IMAGE--FLIP & PLACE ALONG THE LEFT SIDE OF THE FRAME.  

GO TO LAYER PALETTE & DUPLICATE THIS LAYER ONE LAST TIME.  GO TO IMAGE MIRROR. THEN IMAGE FLIP

OPEN DECOR 5 & RESIZE BY 80%  COPY & PASTE ON TOP OF FRAME

OPEN DECOR 26 & RESIZE 80%  COPY & PASTE ONTO IMAGE PLACE ON THE RIGHT SIDE OF THE FRAME, DOWN JUST A LITTLE BIT.   OPEN DECOR 27 & DO THE SAME, PLACING A LITTLE BIT ABOVE THE RED PILLOW

OPEN DECOR 28, RESIZE 60%, COPY & PASTE ONTO FRAME, ON THE LEFT SIDE UP TOWARDS THE TOP A LITTLE.

OPEN DECOR 7 & RESIZE 35%, PLACE ON TOP OF THE FAN

OPEN DECOR 23 & RESIZE 70%  COPY 7 PASTE ON TO FRAME & PLACE ON THE LEFT LOWER PART OF THE FRAME. 

OPEN DECOR 22 DOING THE SAME EXCEPT THIS ONE YOU WILL RESIZE BY 60% & PLACE ABOVE THE GOLD STAR, BUT DOWN A LITTLE.   

OPEN DECOR 24 & RESIZE 60% & PLACE ON TOP OF BUT TO THE LEFT A LITTLE BIT OF THE STARS

OPEN DECOR 19, ROTATE TO THE LEFT. COPY & PASTE ABOVE THE LEAVES AROUND THE FRAME.  I ERASED THE TOP PART OF THE RIBBON STICKING OUT OVER THE FAN & CLOCK.

SEE TAG FOR REFERENCE IF NEEDED FOR PLACEMENT OF ANY OF THESE ELEMENTS

NOW COPY & PASTE YOUR TUBE ABOVE ALL THE ELEMENTS IN THE MIDDLE OF THE FRAME.  

GOT TO EFFECTS--XERO--RADIANCE & APPLY THESE SETTINGS

STRANGENESS - 79
CHARM - 50
TRUTH - 128
BEAUTY - 203

CLICK OK

OPEN DECOR 12 COPY & PASTE ON TO THE BOTTOM LAYER. 

NOW WE ARE GOING TO OPEN FRAME 9 & RESIZE 48%  I ERASED THE HEART ON THE LEFT CORNER, BUT THIS IS UP TO YOU

COPY & PASTE THE FRAME BENEATH THE TUBE LAYER. I PLACED IT IN THE BOTTOM RIGHT HAND CORNER. SO THAT THE RIGHT SIDE OF THE FRAME IS JUST UP AGAINST THE EDGE OF THE SIDE & THE BOTTOM OF THE FRAME  IS UP AGAINST THE EDGE OF THE BOTTOM.

NOW WITH THIS LAYER ACTIVE IN YOUR LAYERS PALETTE, GET YOUR MAGIC WAND & HOLDING DOWN THE SHIFT BUTTON ON YOUR KEYBOARD, CLICK INSIDE BOTH OF THE 2 FRAMES ON FRAME 9.

GO TO SELECTIONS--MODIFY--EXPAND & EXPAND BY 6.

OPEN PAPER 3, COPY & PASTE ONTO TAG, GO TO SELECTIONS--INVERT & HIT DELETE ON YOUR KEYBOARD.
IF YOUR PAPER IS ABOVE THE FRAME LAYER, MOVE IT JUST BELOW IT.

NOW THE LAST THING YOU NEED TO DO IS PUT YOUR NAME ON THE BOTTOM FRAME & IF YOU WISH, AS I DID, TYPE IN DREAM IN THE TOP FRAME

IF YOU ARE SATISFIED WITH YOUR TAG, ADD YOUR COPYRIGHT INFO & SAVE AS A PNG.

THANKS SO MUCH FOR TRYING MY TUTORIAL!!

♥HUGZ♥JESS♥

3/18/2011

postheadericon ♥New Tag/Tut Up♥

HELLO AGAIN LOVELIES!  I GOT A NEW TAG/TUT UP FOR YOU ALL.  THIS IS A CT TUT FOR TAMIES BLOG USING ONE OF HER BEAUTIFUL KITS!

CHEEKY BUNNY BLUE

 
SUPPLIES

PSP: ANY VERSION, I USED PSP X2

TUBE OF CHOICE:  I USED THE ARTWORK OF ISMAEL RAC, YOU MUST HAVE A LICENSE FOR THIS  YOU CAN GET BOTH THE TUBE & INFO ON OBTAINING A LICENSER HERE  

SCRAP KIT OF CHOICE:  I USED CHEEKY BUNNY BLUE BY TAMIE OF ADDICTIVE PLEASURES, WHICH YOU CAN PURCHASE HERE 

MASK OF CHOICE: I USED DESIGNS BY VAYBS MASK #46, WHICH YOU CAN GET HERE, IT IS IN MASK SET #40-51, YOU NEED TO GO DOWN THE PAGE A LITTLE OVER 1/2 WAY

EFFECTS: XERO--RADIANCE

FONT OF CHOICE:  I USED 


OK, LET'S GET STARTED  

OPEN A NEW IMAGE, 700 X 700, AGAIN, I DO MINE TRANSPARENT, BUT YOU CAN ADD A WHITE BACKGROUND IF YOU LIKE. WE ARE GOING TO ADD A PAPER & MASK, SO IT DOESN'T MATTER

OPEN FILMSTRIP FRAME, IT IS JUST CALLED FILMSTRIP, COPY & PASTE ONTO TAG

MAKE SURE YOUR FILMSTRIP IS ACTIVE IN LAYERS PALETTE, TAKE YOUR MAGIC WAND & WHILE HOLDING DOWN THE SHIFT BUTTON ON YOUR KEYBOARD, CLICK INSIDE EACH OF THE 3 FRAMES ON THE FILMSTRIP. WHEN YOU ARE DONE THEIR SHOULD BE A LINE OF MARCHING ANTS INSIDE EACH FRAME. 

GO TO SELECTIONS-->MODIFY-->EXPAND & EXPAND BY 6.  OPEN PAPER 4, COPY & PASTE ONTO TAG. GO TO SELECTIONS-->INVERT, DOUBLE CHECK THAT YOUR PAPER IS HIGHLIGHTED IN LAYER PALETTE & HIT DELETE ON YOUR KEYBOARD.
IF YOUR PAPER IS NOT UNDER YOUR FRAME, MOVE IT BELOW. 

GO TO THE BOTTOM LAYER, GO TO LAYERS, NEW RASTER LAYER  WITH THE NEW LAYER HIGHLIGHTED, OPEN PAPER 5 COPY & PASTE INTO THE NEW LAYER.

NOW ADD YOUR MASK.  IF YOU HAVE THE MASK SAVED IN YOU PSP MASK FOLDER, GO TO LAYERS--> LOAD/SAVE MASK--> LOAD MASK FROM DISK & SELECT THE MASK.  IF YOU HAVE THE MASK OPEN IS PSP, GO TO THE LAYER PALETTE & RIGHT CLICK ON THE PAPER LAYER, GO TO
NEW MASK LAYER-->FROM IMAGE  & SELECT THE CORRECT IMAGE FROM THE DROP DOWN MENU, KEEP THE INVERT MASK DATA  & APPLY GO TO LAYERS-->MERGE--> MERGE GROUP

NOW LET'S ADD OUR TUBE.  THE TUBE I USED HAD 3 IMAGES, A FULL BODY, A CLOSE-UP & ONE IN BETWEEN.  OPEN YOUR FULL BODY TUBE, COPY & PASTE HER ON TOP OF THE FILMSTRIP FRAME & ARRANGE HER AS DESIRED, OR AS I DID MINE, SEE IMAGE FOR REFERENCE.  I ADDED THE
XERO-->RADIANCE TO THE TUBE WITH THE FOLLOWING SETTINGS...

STRANGENESS: 106
CHARM: 33
TRUTH: 0
BEAUTY:  118

NOW OPEN YOUR CLOSE UP IMAGE, IF YOU HAVE ONE, IF NOT YOU CAN DO THE NEXT STEP AS YOU LIKE .  COPY YOUR CLOSE UP TUBE OR OTHER IMAGE.  HIGHLIGHT YOUR PLAIN BLUE PAPER IN THE LAYER PALETTE,  PASTE YOUR TUBE ON TOP OF THE PAPER BUT BELOW THE FRAME.  ADD THE
XERO-->RADIANCE WITH THE SAME SETTINGS AS ABOVE.  MOVE HER TO THE LEFT FRAME OR PLACE AS DESIRED.  THEN GO TO THE LAYER PALETTE & RIGHT CLICK ON THAT LAYER & DUPLICATE.  GO TO IMAGE-->MIRROR.  YOU MAY HAVE TO MOVE HER DOWN A LITTLE BIT ON THE RIGHT SIDE BECAUSE THE RIGHT FRAME IS A LITTLE BIT LOWER THAN THE LEFT.

NOW MAKE FILMSTRIP FRAME ACTIVE IN LAYER PALETTE, GET MAGIC WAND OUT AGAIN & WHILE HOLDING DOWN SHIFT ON KEYBOARD, CLICK INSIDE THE LEFT FRAME & RIGHT FRAME ONLY.
GO TO SELECTIONS-->MOFIDY-->EXPAND & EXPAND BY 6 AGAIN.  GO TO INVERT
HIGHLIGHT ONE OF THE TUBES IN THE LAYER PALETTE & HIT DELETE ON YOUR KEYBOARD.  HIGHLIGHT THE OTHER TUBE IN THE LAYER PALETTE & HIT DELETE AGAIN.
GO TO IMAGE-->SELECTIONS-->SELECT NONE.

NOW WE WILL ADD THE ELEMENTS.  I WILL TELL YOU WHAT I ADDED, RESIZED & WHERE I PLACED THEM.  BUT YOU CAN ADD WHAT YOU LIKE OR ADD LESS OR MORE.  THIS IS UP TO YOU.  I KNOW SOME PEOPLE LIKE TO GET CREATIVE ON THIS PART & DO THERE OWN THING OR ADD THERE OWN TWIST TO IT.

OPEN THE GLITTER LINE, GO TO IMAGE-->ROTATE-->FREE ROTATE & ROTATE 90 DEGREES TO THE LEFT.  I ERASED SOME OF EACH END SO IT WOULD FIT AROUND THE EDGE OF THE MASK.  I DID THE LONGER PARTS FIRST, WHICH GO ACROSS WHICH IS WHY WE ROTATED IT. WHEN YOU HAVE IT THE CORRECT LENGTH, PLACE ALONG THE OUTSIDE EDGE OF THE MASK. YOU CAN SEE ON MINE WHERE IT IS, BUT IT MIGHT BE A LITTLE HARD TO SEE BECAUSE OF THE NETTING.  ONCE YOU HAVE IT PLACED, RIGHT CLICK ON IT IN THE LAYER PALETTE & DUPLICATE, GO TO IMAGE-->FLIP. YOU MAY HAVE TO MOVE IT AROUND A LITTLE BIT.

NOW DUPLICATE IT AGAIN, GO TO IMAGE-->ROTATE-->FREE ROTATE & ROTATE IT BACK 90 DEGREES TO THE LEFT SO IT IS UP & DOWN AGAIN.  YOU WILL HAVE TO ERASE A LITTLE MORE SO IT WILL FIT ON THE OUTSIDE EDGE OF THE MASK GOING UP & DOWN.  ONCE YOU HAVE IT PLACED AS DESIRED, DUPLICATE & MIRROR.  AGAIN, YOU MAY HAVE TO RE ARRANGE IT A LITTLE.

OPEN SPARKLES, THESE ARE THE BLUE ONES.  COPY & PASTE & PLACE UNDER YOUR MASK LAYER TOWARDS THE TOP LEFT SO SOME ARE STICKING OUT OVER THE TOP & THE SIDE.  YOU MAY WANT TO ERASE ANY XTRA THAT YOU WANT TO GET RID OF.  ONCE SATISFIED WITH IT, DUPLICATE, GO TO IMAGE-->MIRROR.  DUPLICATE AGAIN, GO TO IMAGE-->FLIP.  DUPLICATE ONE MORE TIME, IMAGE-->MIRROR.  YOU WANT THEM TO BE ON ALL 4 SIDES. 

OPEN THE NETTING, COPY & PASTE JUST ABOVE YOUR MASK LAYER, OVER THE GLITTER LINE LAYERS AS WELL.  ARRANGE ON THE TOP PART OF YOUR TAG SO THE NETTING IS STICKING JUST OUT OVER THE TOP OF THE MASK WHERE THE SWIRLY PIECES OF THE MASK ARE.  ONCE IT'S WHERE YOU WANT IT, DUPLICATE IT, GO TO IMAGE-->FLIP, THEN IMAGE-->MIRROR.

OPEN PEARLS, GO TO IMAGE-->RESIZE & RESIZE 85%.  COPY & PASTE ON TOP OF NETTING, TOWARDS THE TOP PART OF THE MASK.  DUPLICATE, GO TO IMAGE-->FLIP.  RE-ARRANGE IF NEEDED. 

NEXT IS SPARKLES 2, OPEN & RESIZE 75%.  COPY & PASTE ON TOP OF FILMSTRIP & TUBES.  BASICALLY YOU WANT THEM PLACED JUST UNDER YOUR FULL BODY TUBE.  ARRANGE AS DESIRED.  SEE MY IMAGE FOR REFERENCE IF U WANT THEM PLACED AS MINE ARE.  I ERASED PARTS OF THEM, BUT THIS IS UP TO YOU.

OPEN SCATTERED BLING, COPY & PASTE ABOVE THE SPARKLES 2 YOU JUST ADDED. I PUT MINE TOWARDS THE TOP OF THE FRAME. AS YOU CAN SEE ON MINE, THEY LAY OVER THE FOREHEAD OF THE CLOSE UP TUBES.  I ERASED A BIT OF EACH SIDE OF THIS SO IT WAS JUST THE RIGHT LENGTH.  ONCE YOU ARE HAPPY WITH IT, DUPLICATE, GO TO IMAGE-->FLIP.

OPEN THE HEARTS, I ERASED ALL BUT ONE OF THE BIGGER SIZED ONES.  YOU CAN USE MORE IF YOU LIKE, BUT I JUST WANTED ONE OF THEM.  AS YOU CAN SEE ON MY TAG, I PLACED IT ON THE CLOSE UP TUBES CHEEK.  THEN DUPLICATED & MIRRORED IT.  

NOW OPEN THE LIPS & RESIZE BY 45%. COPY & PASTE ONTO TAG.  SEE MY TAG FOR PLACEMENT.  i DUPLICATED & MIRRORED & ARRANGED TO WHERE I WANTED IT.  I THEN WENT TO
EFFECTS-->EYE CANDY 4000-->GRADIENT GLOW. WHEN IT FIRST COMES UP, SLIDE THE GLOW WIDTH TO 0 PIXELS.  THEN CLICK ON THE COLOR TAB,  MAKE THE COLOR WHITE & SLIDE THE ARROW ABOUT 3/4 OF THE WAY OVER SO THAT THE LIPS HAVE A WHITE GLOW AROUND THEM. CLICK  OK OR APPLY.

THE LAST ELEMENT IS THE BANNER.  COPY & APSTE ONTO THE TAG. MY FULL BODY TUBE IS MISSING FEET...LOL!  SO IA PASTED THE BANNER RIGHT AT THE BOTTOM SO YOU COULD NOT SEE THEM CUT OFF.  IF U R USING A TUBE LIKE THIS, YOU CAN DO THE SAME, IF NOT PLACE AS YOU DESIRE.  I THEN ADDED THE NAME ON THE BANNER.

IF YOU ARE HAPPY WITH YOUR TAG, YOU CAN MERGE & RESIZE IF U LIKE. ADD YOUR COPYRIGHT INFO & SAVE AS A PNG.

THANKS FOR TRYING MY TUTORIAL!

♥HUGZ♥JESS♥ 
3/17/2011

postheadericon ♥New Announcement & New Tag/Tut♥

  HELLO MY LOVELIES!  I HOPE THAT EVERYONE IS HAVING A WONDERFUL DAY/ EVENING,
DEPENDING ON WHAT PART OF THE WORLD YA'LL ARE IN.  OK, SO I AM NOW A VERY PROUD CT MEMBER OF SCRAPS WITH ATTITUDE, YAY!  I AM DOING A SORT OR TRIAL RUN I WOULD SAY JUST TO MAKE SURE THEY THEY ALL LIKE ME & MY WORK, SO MY FINGERS ARE CROSSED :D.

NOW I HAVE A NEW TUT FOR YOU.  THIS IS MY 1ST CT TUT FOR SCRAPS WITH ATTITUDE.

GOTHIC BRIDE



THIS TUTORIAL WAS CREATED BY CREATIVE DESIGNZ.  ANY SIMILARITIES TO ANY OTHER TUTORIAL ARE PURELY COINCIDENTAL.


THIS TUTORIAL WAS WRITTEN FOR THOSE WITH A GENERAL WORKING KNOWLEDGE OF PSP


SUPPLIES:


PSP: ANY VERSION, I USED PSP X2


TUBE OF CHOICE: I USED THE BEAUTIFUL ARTWORK OF IRINA GRANK, YOU MUST HAVE A LICENSE TO USE HER WORK.  YOU CAN GET BOTH HER TUBES & INFO ON HOW TO OBTAIN A LICENSE HERE 


SCRAP KIT OF CHOICE:  I AM USING A BEAUTIFUL KIT CALLED GOTHIC BRIDE BY RIEKA RAFITA FROM SCRAPS WITH ATTITUDE, WHICH YOU CAN PURCHASE HERE 


MASK OF CHOICE:  I USED MASK #116 FROM GEMS TAGGIN SCRAPS.  YOU WILL WANT TO DOWNLOAD MASKS #111-119. WHEN YOU GO TO THE PAGE, GO ABOUT 3/4 OF THE WAY DOWN, YOU CAN GET THAT HERE  REMEMBER TO LEAVE SOME ♥ IF YOU DOWNLOAD


FONT OF CHOICE:  I USED INSPIRATION


EFFECTS: XERO - RADIANCE




OK, LET'S GET STARTED:


OPEN A NEW IMAGE, I AM IN THE HABIT OF USING TRANSPARENT BACKGROUNDS, BUT YOU CAN USE A WHITE BACKGROUND IF YOU'D LIKE.


OPEN PAPER 1, NOW THIS PAPER IS WIDER THAN ALL THE OTHERS, SO WE NEED TO CROP IT.  GO TO YOUR CROP TOOL & CROP IT OUT TO 700 x 700.  THE LENGTH IS ALREADY 700, IT IS JUST THE WIDTH WE NEED TO CROP DOWN.  WHEN YOU START TO USE YOUR CROP TOOL & ARE ADJUSTING THE SIDES, IF YOU LOOK ON THE BOTTOM OF THE SCREEN, YOU WILL SEE WHAT THE SIZE IS AS YOU CHANGE IT, SO ONCE YOU GET IT TO
700 x 700, CLICK THE CHECK MARK OR ENTER, DOESN'T MATTER HOW YOU DO IT. 

WHEN YOU HAVE IT TO THE DESIRED SIZE, COPY & PASTE ONTO YOUR BLANK CANVAS.

NOW WE WILL ADD THE MASK.  IF YOU HAVE A MASK FILE IN YOUR PSP FOLDERS, THAN YOU WILL GO TO LAYERS--LOAD/SAVE MASK--LOAD MASK FROM DISK & FIND YOUR MASK. YOU WILL WANT TO MAKE SURE SOURCE LUMINANCE & FIT TO CANVAS ARE CHECKED & THAT INVERT TRANSPARENCY IS NOT CHECKED.



IF YOU DON'T HAVE A FOLDER FOR YOUR MASKS OR JUST WANT TO OPEN THE FILE DIRECTLY IN PSP, ALL YOU NEED TO DO IS OPEN THE MASK & SHRINK IT.  IN YOUR LAYERS PALETTE RIGHT CLICK ON YOUR PAPER LAYER, GO UP TO NEW MASK LAYER--FROM IMAGE, UNDER SOURCE WINDOW CLICK THE ARROW & FIND YOUR MASK, MAKE SURE SOURCE LUMINANCE IS CHECKED & INVERT TRANSPARENCY IS NOT CHECKED.


OK, NOW THAT THAT IS OVER...LOL!  


OPEN UP FRAME 3, GO TO IMAGE--FREE ROTATE & ROTATE TO THE RIGHT 90 DEGREES.  COPY & PASTE ON TOP OF YOUR PAPER LAYER.

OPEN YOUR DESIRED TUBE, GO TO EFFECTS--XERO--RADIANCE & USE THE FOLLOWING SETTINGS




COPY & PASTE ON TOP OF FRAME

IN YOUR LAYERS PALETTE, HIGHLIGHT YOUR FRAME, GET YOUR MAGIC WAND & CLICK INSIDE THE FRAME.  GO TO SELECTIONS--MODIFY--EXPAND & EXPAND 6 PIXELS.  NOW HIGHLIGHT YOUR TUBE IN THE LAYERS PALETTE, GO BACK TO SELECTIONS--INVERT.

GET YOUR ERASER & ERASE ALL THE BOTTOM OF THE TUBE UNTIL IT LOOKS LIKE THE BOTTOM OF YOUR TUBE IS UNDER THE FRAME WHILE THE TOP PART IS STILL ABOVE IT.  SEE TAG FOR REFERENCE IF NEEDED.  WHEN DONE, GO TO SELECTIONS--SELECT NONE.

NOW WE ARE JUST GOING TO DO A BIT OF RESIZING OF ELEMENTS & PLACING THEM EITHER AS DIRECTED OR AS YOU DESIRE.  TO RESIZE AN ELEMENT, WHEN YOU OPEN IT, GO TO IMAGE--RESIZE &YOU CAN EITHER RESIZE BY PIXEL OR PERCENT.  WE WILL BE DOING PERCENTS FOR THESE ELEMENTS. 

OPEN UP THE MOON, RESIZE 65%, COPY & PASTE, I PLACED MINE IN BETWEEN THE PAPER LAYER & THE FRAME LAYER.  YOU WILL NOTICE ON THE PAPER, THERE IS A MOON, I PLACED MY MOON OVER THAT ONE SO IT COULDN'T BE SEEN

OPEN RIBBON 4, RESIZE 50%, COPY & PASTE ON TOP OF FRAME & POSITION ON RIGHT HAND SIZE, SEE TAG FOR REFERENCE IF NEEDED  IN LAYERS PALETTE, RIGHT CLICK ON THE RIBBON & DUPLICATE
GO TO IMAGE--MIRROR

NOW OPEN THE BLINKS, THIS ELEMENT LOOKS LIKE A NECKLACE WITH SEVERAL CHAINS HANGING DOWN.  I ERASED THE TOP PART, THE PART THAT LOOKS LIKE THE NECKLACE THAT GOES AROUND YOUR NECK & LEFT JUST THE CHAINS HANGING DOWN.  COPY & PASTE THIS ON TOP OF YOUR PAPER BUT UNDER YOUR FRAME.  I PLACED MINE TOWARDS ONE SIDE, THEN DUPLICATED & MIRRORED. 

OPEN THE DOVE & RESIZE 30% COPY & PASTE.  I PLACED MINE ON TOP OF THE MOON, TOWARDS THE LEFT SIDE OF IT.  SEE TAG FOR REFERENCE

OPEN FLOWER 5, RESIZE 30%.  PLACE IT ON TOP OF THE FRAME ABOVE THE RIBBON ON THE RIGHT HAND SIDE, RIGHT WHERE THE WIRE OF THE FRAME MEETS THE FRAME ITSELF. AGAIN SEE MY TAG FOR PLACEMENT IF NEEDED.  ONCE ADJUSTED TO YOUR LIKING, DUPLICATE & MIRROR IT.

NEXT OPEN SKULL 2, RESIZE 30%, PLACE ON BOTTOM RIGHT HAND SIZE, ADJUST TO YOUR LIKING, THEN DUPLICATE & MIRROR.

OPEN THE CLOCK ELEMENT,  RESIZE 50% & PLACE BEHIND THE SKULLS ON THE LEFT HAND SIDE

OPEN CHAMPAGNE BOTTLE & GLASS, RESIZE 30%, PLACE ON THE RIGHT HAND SIDE PARTIALLY IN FRONT OF SKULLS

OPEN BLUE BELL & RESIZE

ALMOST DONE NOW, JUST A FEW MORE ELEMENTS...LOL!  

OK, OPEN THE SPARKLE, COPY & PASTE ON TOP OF PAPER LAYER, ADJUST TO LIKING

OPEN THE STORM ELEMENT, WHICH IS THE LIGHTNING.  I RESIZED IT 50% & JUST ADJUSTED IT TO WHERE IT LOOKED WELL & WHERE YOU COULD SEE SOME OF IT.  SO YOU CAN ADJUST IT TO YOUR LIKING.  

OPEN THE BOOK, RESIZE 40%, COPY & PASTE ONTO TAG. I PLACED MINE ON TOP OF THE SKULLS ON THE LEFT HAND SIDE TO MAKE IT LOOK AS THOUGH IT WERE LEANING UP AGAINST THEM.  YOU CAN DO THIS OR ADJUST TO YOUR LIKING.

NOW, LAST BUT NO LEAST...OPEN BUTTERFLY 2, RESIZE 30 %.  I PLACED MINE TO MY LIKING AROUND THE FRAME. YOU CAN SEE WHERE THEY ARE ON MY TAG.  SO ADJUST THESE TO YOUR PREFERENCE.

NOW THAT MY FRIENDS IS THE END OF THIS TUTORIAL.  IF YOU ARE HAPPY WITH YOUR RESULTS, ADD YOUR NAME IN YOUR FONT OF CHOICE & ADD THE COPYRIGHT INFO.  SAVE AS A PNG & YOU ARE DONE.

THANK YOU SO MUCH FOR TRYING MY TUT.  I ALWAYS LOVE TO HEAR FEEDBACK, WHETHER IT IS GOOD OR NOT SO GOOD.  I AM STILL LEARNING SO I CAN ABSOLUTELY TAKE THE CRITICISM. I WILL NEVER GET IT JUST RIGHT IF I DON'T KNOW WHAT I AM DOING WRONG.  

HAPPY SCRAPPING/PSPING!

♥HUGZ♥JESS♥

HERE IS ONE MORE OF THE SAME TAG THAT I MADE FOR MISSY.  THANK YOU SO MUCH FOR THE OPPORTUNITY TO CT FOR YOUR AMAZING STORE/BLOG.  YOU RAWK!!!

3/06/2011

postheadericon ♥My 1st ct tut for Tamie @ Addictive Pleasures♥

HELLO EVERYONE!  I HAVE A NEW TUT HERE, MY 1ST TUT FOR TAMIE'S SITE, ADDICTIVE PLEASURES. I AM EXCITED ABOUT IT & HOPE THAT SHE LIKES IT, AS WELL AS EVERYONE ELSE!

DREADFUL HEART 

  
THIS TUTORIAL WAS WRITTEN FOR THOSE WITH A GENERAL WORKING KNOWLEDGE OF PSP 

SUPPLIES:

PSP: ANY VERSION:  I USED PSP X2

SCRAP KIT OF CHOICE:  I USED DREADFUL HEART BY TAMIE AT ADDICTIVE PLEASURES, WHICH YOU CAN PURCHASE HERE  

TUBE OF CHOICE:  I USED THE ARTWORK OF ELIAS CHATZOUDIS, YOU MUST HAVE A LICENSE TO USE HIS WORK YOU CAN GET BOTH THE TUBE & INSTRUCTIONS ON OBTAINING A LICENSE HERE

FONT OF CHOICE:  I USED CALLIE HAND & ARIAL 

XERO:  RADIANCE

OK, LET'S GET STARTED:

OPEN A NEW IMAGE, I DID 750 x 700, WITH A TRANSPARENT BACKGROUND
OPEN FRAME 2, GO TO IMAGE, ROTATE, FREE ROTATE & ROTATE LEFT 90 DEGREES

DUPLICATE FRAME & MIRROR. THIS IS WHAT YOU WANT... 


 NOT THIS NEXT PART IS TRICKY, I WILL EXPLAIN IT THE BEST I CAN & ADD PICS FOR REFERENCE.   

MAKE ONE OF YOUR FRAMES ACTIVE & ERASE PART OF IT, HIGHLIGHT THE OTHER FRAME & ERASE THE OPPOSITE SIDE FROM THE ONE YOU JUST DID.  YOU DON'T WANT TO DO ALL OF IT, CAUSE YOU ARE EVENTUALLY GOING TO PUT THEM TOGETHER .

THIS IS WHAT I DID...
 
 YOU WILL COMBINE THE 2 TO LOOK LIKE ONE FRAME. THE PURPOSE OF THIS WAS TO GET THE POINT OF THE FRAME ON BOTH SIDES. SHOWN BELOW...

ONCE YOU HAVE THE FRAME TO YOUR LIKING, GO TO LAYERS, MERGE, MERGE DOWN OR MERGE VISIBLE, WHICHEVER IS EASIER FOR YOU.

WITH FRAME LAYER ACTIVE, GET YOUR MAGIC WAND & CLICK INSIDE FRAME, GO TO SELECTIONS, MODIFY, EXPAND & EXPAND BY 6

 COPY & PASTE PP11, MAKE SURE IT IS UNDER FRAME LAYER. 

MAKE SURE PAPER LAYER STAYS ACTIVE IN LAYER PALETTE, GO TO SELECTIONS, INVERT & HIT DELETE ON YOUR KEYBOARD.  GO TO SELECTIONS, SELECT NONE

OPEN RIBBON 3 GO TO IMAGE, SELECT, MIRROR  COPY & PASTE ON TOP OF FRAME LAYER
GO TO IMAGE, RESIZE 70%, MAKE SURE RESIZE ALL LAYERS IS NOT CHECKED 

PLACE IN TOP LEFT CORNER OF FRAME, SEE MY TAG FOR REFERENCE IF NEEDED 
NOW IN YOUR LAYER PALETTE, RIGHT CLICK ON RIBBON & DUPLICATE, GO TO IMAGE, MIRROR
THEN IMAGE, FLIP
YOU WANT THE RIBBON TO BE IN TOP LEFT CORNER & BOTTOM RIGHT CORNER. 

NOW OPEN ROSE, GO TO IMAGE & RESIZE 50% COPY & PASTE ON TOP OF RIBBON LAYERS
PLACE IN EACH OF THE 4 CORNERS, YOU WILL HAVE TO DUPLICATE, MIRROR & FLIP A COUPLE LAYERS OR PLACE AS YOU LIKE

OPEN WINGED HEART, RESIZE 50% COPY & PASTE ABOVE ROSE LAYERS. ARRANGE AT THE TOP OF THE FRAME IN THE MIDDLE, RIGHT CLICK ON HEART IN LAYERS PALETTE & DUPLICATE, GO TO IMAGE & FLIP YOU MAY HAVE TO REARRANGE A LITTLE SO IT IS EVEN ON BOTTOM OF FRAME

OK, ALMOST DONE...LOL!  

IN YOUR LAYER PALETTE, MAKE YOU PAPER LAYER ACTIVE OPEN UP THE PEARLS ELEMENT & COPY & PASTE ONTO TAG ABOVE THE PAPER LAYER & BELOW THE FRAME.  MOVE THE PEARLS UP SO JUST THE TOP IS STICKING OUT FROM UNDER THE TOP OF THE FRAME.  SEE PIC BELOW FOR REFERENCE...

THIS NEXT STEPS ARE NOT COMPLICATED, ONLY COMPLICATED TO EXPLAIN , SO YOU CAN DO IT AS I DID OR HOWEVER YOU LIKE I WILL EXPLAIN AS BEST I CAN, HOPEFULLY WITHOUT MUDDLING IT UP...LOL!

OK, DUPLICATE YOUR PEARLS, GO TO IMAGE FLIP, THEN IMAGE MIRROR
DUPLICATE THE PEARLS ON THE BOTTOM, GO TO IMAGE FREE ROTATE & ROTATE TO THE LEFT 90 DEGREES
ARRANGE ON THE RIGHT SIDE SO THE EDGE IS STICKING OUT FROM UNDER THE FRAME
DUPLICATE THAT LAYER OF PEARLS & MIRROR THEN GO TO IMAGE & FLIP ARRANGING ON THE OTHER SIDE IF NEEDED.   NOW THE REASON I FLIPPED THESE IS SO THE BOLDER PEARLS ON THE TOP WERE EVERY OTHER ONE, I HAVE AN EXAMPLE PIC BELOW WITH THE BOLDER SIDE CIRCLES, SO YOU CAN SEE WHAT I MEAN.


NOW OPEN DECOR 3, GO TO IMAGE & RESIZE 60%  I USED MY PICK TOOL TO TURN IT SLIGHTLY TO THE RIGHT, BUT YOU CAN DO THE FREE ROTATE AS WELL.

OPEN THE GLASS ELEMENT, RESIZE 70% & PLACE IN BETWEEN THE PAPER LAYER & THE FRAME LAYER.

NOW ALL THAT'S LEFT IS YOUR TUBE.  I TOOK MY CLOSE UP LAYER & RESIZED HER 80%. I PLACED HER ON TOP OF THE PAPER BUT UNDER THE FRAME & GLASS.
I ADDED XERO RADIANCE WITH THESE SETTINGS, BUT YOU CAN ALTAR AS YOU WISH...


I ALSO CHANGED THE BLEND MODE TO LUMINANCE (LEGACY)

NEXT I ADDED MY TUBE & PLACED HER ON TOP OF EVERYTHING DOWN A BIT TOWARDS THE RIGHT, ARRANGE AS YOU LIKE.  ADD THE SAME SETTINGS FOR XERO RADIANCE AS ABOVE. 

I ALSO ADDED SHE'S A HEART BREAKER IN THE TOP LEFT CORNER, BUT THIS IS OPTIONAL, FOR THIS I USED CALLIE HAND FONT

ADD YOUR NAME & COPYRIGHT INFO  IF YOU ARE HAPPY, SAVE AS PNG

I HOPE THAT THIS WAS EASY TO FOLLOW. I AM STILL WORKING ON TRYING TO SHORTEN THEM. I KNOW MOST EVERYONE KNOWS HOW TO DUPLICATE & MIRROR & RESIZE & WHATNOT, BUT I ALWAYS FEEL I NEED TO EXPLAIN MORE FOR SOMEONE WHO MAY COME ALONG & IS NEW TO IT ALL. ANYWAYS, THANKS FOR TRYING MY TUT!

♥HUGZ♥JESS♥



About Me

My Photo
Jessica Batty
I am 30yrs old.  I have a beautiful daughter named Olivia who is the love of my life.  I am married to an amazing man named Michael, who is the other love of my life.  We also have a 2 1/2 yr old pitbull names Maximus.  He is just like one of the kids...lol!  We live in a small town on the coast of Maine. The ocean is a stones throw from my back door.  It is very beautiful here, no matter what time of year.  But the summers are too warm & the winters too cold, obviously...LOL!  My hobbies are reading, writing & PSPing. I have this tutorial site & I am also a member of various forums, all PSP related :D  If you have any questions, please do not hesitate to send me an email.  ♥Hugz♥MsJess♥
View my complete profile

My Blinkie